理工学部Faculty of Science and Engineering
MEC100XB(機械工学 / Mechanical engineering 100)CAD入門Introduction to CAD
平野 利幸Toshiyuki HIRANO
授業コードなどClass code etc
学部・研究科Faculty/Graduate school | 理工学部Faculty of Science and Engineering |
添付ファイル名Attached documents | |
年度Year | 2022 |
授業コードClass code | H5112 |
旧授業コードPrevious Class code | |
旧科目名Previous Class title | |
開講時期Term | 秋学期授業/Fall |
曜日・時限Day/Period | 木3/Thu.3 |
科目種別Class Type | |
キャンパスCampus | 小金井 |
教室名称Classroom name | 各学部・研究科等の時間割等で確認 |
配当年次Grade | |
単位数Credit(s) | |
備考(履修条件等)Notes | |
他学部公開科目Open Program | |
他学部公開(履修条件等)Open Program (Notes) | |
グローバル・オープン科目Global Open Program | |
成績優秀者の他学部科目履修制度対象Interdepartmental class taking system for Academic Achievers | |
成績優秀者の他学部科目履修(履修条件等)Interdepartmental class taking system for Academic Achievers (Notes) | |
実務経験のある教員による授業科目Class taught by instructors with practical experience | |
SDGsCPSDGs CP | |
アーバンデザインCPUrban Design CP | |
ダイバーシティCPDiversity CP | |
未来教室CPLearning for the Future CP | |
カーボンニュートラルCPCarbon Neutral CP | |
千代田コンソ単位互換提供(他大学向け)Chiyoda Campus Consortium | |
カテゴリー<理工学部>Category |
機械工学科機械工学専修 学科専門科目 |
すべて開くShow all
すべて閉じるHide All
Outline (in English)
【Course outline】
This course is to leran the basic operation of 3D CAD which is
widely used at industrial field. Through the operation, recognition
and expression of 3D shape of machine parts and assembly
are acquired.
【Learning Objectives】
1. To understand the concept and basic operation of mechanical 3D CAD.
2. To understand the basic rules of mechanical drafting.
【Learning activities outside of classroom】
The standard study time for this class is 4 hours, including preparation and review. Students are expected to complete and submit the exercises given as assignments at home.
【Grading Criteria /Policy】
Evaluation method: Students will be evaluated comprehensively based
on their submission of CAD exercises and their performance in the
comprehensive exercises.
Evaluation criteria: Students who achieve a total of 60% or more will
pass the course.
授業で使用する言語Default language used in class
日本語 / Japanese
授業の概要と目的(何を学ぶか)Outline and objectives
ものづくり現場においては機械製図の素養が必須であり、そのツールとして広く利用されている2次元、3次元CADの基本操作を学ぶことで、物体の形状把握や表現法を習得する。
到達目標Goal
1.機械系3次元CADの概念と基本操作を理解する。
2.機械製図の基本的なルールを理解する。
この授業を履修することで学部等のディプロマポリシーに示されたどの能力を習得することができるか(該当授業科目と学位授与方針に明示された学習成果との関連)Which item of the diploma policy will be obtained by taking this class?
ディプロマポリシーのうち、「DP1」と「DP2」と「DP4」に関連
授業で使用する言語Default language used in class
日本語 / Japanese
授業の進め方と方法Method(s)(学期の途中で変更になる場合には、別途提示します。 /If the Method(s) is changed, we will announce the details of any changes. )
JIS機械製図の手法を説明しながら、簡単な機械要素の製図を通じて、物体表現の方法と3次元CADの特徴および基本的な操作法を実習によって習得する。
適時、質疑によって受講生の疑問にフィードバックを行う。
アクティブラーニング(グループディスカッション、ディベート等)の実施Active learning in class (Group discussion, Debate.etc.)
なし / No
フィールドワーク(学外での実習等)の実施Fieldwork in class
なし / No
授業計画Schedule
授業形態/methods of teaching:対面/face to face
※各回の授業形態は予定です。教員の指示に従ってください。
第1回[対面/face to face]:イントロダクション
ガイダンス
第2回[対面/face to face]:JISによる機械製図法
機械製図を行うための決まりごとであるJISの製図法を概説
第3回[対面/face to face]:CADの種類と特徴
CADの種類、特性などを概説
第4回[対面/face to face]:CADの概念と理論
CADによる製図の考え方などを概説
第5回[対面/face to face]:CADの基本操作
CADソフトの起動終了、ファイル作成保存、基本的なコマンドなど
第6回[対面/face to face]:簡単な機械要素のCAD演習(1)
簡単な部品の作成
第7回[対面/face to face]:簡単な機械要素のCAD演習(2)
簡単な組立部品の作成
第8回[対面/face to face]:簡単な機械要素のCAD演習(3)
簡単な図面の作成
第9回[対面/face to face]:総合演習
前半で習得した操作のおさらい
第10回[対面/face to face]:簡単な機械システムのCAD演習(1)
やや複雑な部品の作図(1)
第11回[対面/face to face]:簡単な機械システムのCAD演習(2)
やや複雑な部品の作図(2)
第12回[対面/face to face]:簡単な機械システムのCAD演習(3)
やや複雑な部品の作図(3)
第13回[対面/face to face]:簡単な機械システムのCAD演習(4)
やや複雑な部品の作図(4)
第14回[対面/face to face]:総合演習
自由課題による作図
授業時間外の学習(準備学習・復習・宿題等)Work to be done outside of class (preparation, etc.)
演習科目のため特にありません
テキスト(教科書)Textbooks
授業にて配布します
参考書References
特にありません
成績評価の方法と基準Grading criteria
評価方法: CAD演習の提出状況と、総合演習の出来具合で総合的に評価します。
評価基準: 合計で60%以上を達成したものを合格とする。
学生の意見等からの気づきChanges following student comments
授業を円滑に進めるため、貸与ノートPCではなく、マルチメディア教室を使います。
学生が準備すべき機器他Equipment student needs to prepare
CADソフト「SOLIDWORKS」を使用します。
貸与ノートPC上で動作することを確認のこと。